Equipment used for XC ski,
snowmobile trail grooming,
Manufacturer PRINOTH Tucker Sno-Cat Corporation
Website www.prinoth.com www.sno-cat.com
Model 2019 HUSKY T4f / 2019 HUSKY X T4f 2000E
Make MTU Cummins
Type Turbodiesel with electronic fuel system, Tier 4 final Diesel, turbo, after cooled, Tier 4i or F
Model 4R 1000 | OM 934 QSB 6.7
No.of Cylinders 4 6
Displacement 5,100 cc 6,700 cc
Horsepower 231 hp - ECE 173 hp
Maximum Torque 664 lb. ft. / 900 Nm @ 1,200-1,600 rpm 590 lb. ft.
Average Fuel Consumption – 3 Gal/hr
Fuel Tank Capacity 41 Gal –
Type Rexroth hydrostatic: infinitely variable –
Brakes Hydrostatic Allison automatic
Parking Brakes Spring applied multi-disk, pressure released Hydraulic disc, foot service type
Emissions Exhaust Emission Standard EPA Tier 4 final / Euromot IV –
Standard Track - Steel - Cleat Width Starting from 32.9 in. 26 in. all-rubber / 28 in. steel / 38 in. steel
Side Hill Plate Included Yes –
Carbie Ice Spikes Included Yes –
Vehicle Width w/o Tracks 96.3 in. –
Vehicle Width w/ Standard Tracks 98 in. / 110 in. / 122 in. 94 in. / 104 in. / 117 in.
Overall Height 109 in. 108 in. / 105-112 in.
Overall Length Including Front Blade and Tiller 291 in. (with closed blade wings) 22 ft.
Ground Clearance 12 in. 15 in.
Vehicle Weight w/ Tracks 10,781 lb. (with 2.5 alu tracks) 10,500 lb. without blade
Total Admissibled Weight of Vehicle 16,534 lb. –
Blade and Tiller Weight Combined 1,665 lb. min. (depending on configuration) –
Voltage 24 V 12 V
Alternator 28 V / 150 A 160 A
Batteries 2 x 12 V 2 x 12 V
Cold Start Rating 680 A 950 each
Steering Steering wheel / steering levers Yes, Full circle type
Hydraulic Circuits - Front 6 –
Hydraulic Circuits - Rear 6 3
Standard Blade Type 12-way MASTERBLADE / 12-way HUSKY BLADE Blade not standard; 6- / 8- / 12-Way available
Standard Tiller Type POWERTILLER –
Standard Attachment #1 – –
Standard Attachment #2 – –
Max. Speed 15 m.p.h. –
Inside Turning Radius 0 degrees –
Ground Pressure w/ Standard Tracks Starting from 1.08 psi min. (depending on track width) –
Rigid tiller and Flex tiller available in new dimensions.
Exceptional operator comfort, low noise level and vibrations.
X version is the ideal vehicle for small scale snowparks or daily park maintenance.
Increased range of blade movement comparted to standard vehicle.
Four tracks for smooth ride, even ground pressure.
Pivot steering, no outside track spinning on corners.
Mechanical power train, more horsepower to tracks.
Made in U.S.A.
Floating position for front blade.
SNOW HOW Fleet Management.
Extra lights, tool boxes, winches, custom options.
6- / 8- / 12-way blades, up to 14 ft.
10-12 ft. tiller, compactor bar, track setter.
20 April 2020 | snowopsmag.com